K.T.S Stengrep


K.T.S Stone Fork
K.T.S Stone Forks come in four different sizes, and they are all made of weldable Swedish special steel from Ovako, Smedjebacken, Sweden. Both design and choice of materials have been made in order to maximize quality and durability. Bolted and exchangeable attachments make it easier and cheaper the day you buy a new tractor. This also makes it possible to mount attachments so that the stone forks can be used in the 3-point hitch both at the rear of the tractor and at the front lift. The smallest one is specially designed for smaller loaders and skid-steer loaders, and the largest one with its short bottom is very suitable for front lift usage.

Front horns



The front edge of the stone forks is reinforced in order to make it withstand heavy strain. The front horns on all K.T.S Stone Forks are exchangeable. The picture above shows a 2.4 m stone fork, which is no longer in production.
 

Stone container



Our stone forks have extra large stone containers, so that you will not have to empty the fork too often, a fact that means less crossings of the field. The lower part of the stone container is higher than the horns. This means that when the fork is levelled to load the next stone, the lower part of the stone container will not touch the ground, which in turn means that wear and consequently also costs will be reduced. The picture above shows a K.T.S Stone Fork 2.0 m.

Attachment for 3-point hitch (extra equipment)

3-point attachment, pins mm shaft Category II, 28 mm
Shaft length 825 mm, inside of hydraulic arms
Pin dimension for lifting rod Category II, 25 mm
Pins for hydraulic arms and lifting rod Yes / standard
Hydraulic lifting rod for tilting Extra equipment

 

K.T.S has some 30 different attachments for stone forks.

 

 

Contact K.T.S Maskiner

Phone:      +46 19 58 50 10
Fax:  +46 19 57 42 33
E-mail:  info@kts.se

 

         

Specifications

Equipment 1.2 m 1.5 m 2.0 m 2.35 m
Working width 1 200 mm 1 500 mm 2 000 mm 2 350 mm
Volume, full measure, approx. 0.30 m3 0.47 m3 0.62 m3 0.81 m3
Depth 800 mm 1 000 mm 1 000 mm 850 mm
Height 475 mm 475 mm 475 mm 625 mm
Distance from front edge to C/C buckle 360 mm 380 mm 380 mm 360 mm
Light shaft between round bars 80 mm 80 mm 80 mm 80 mm
Diameter of round bar, stone container 30 mm 30 mm 30 mm 35 mm
Weight including Trima SMS attachments 167 kg 232 kg 282 kg 409 kg
Stone-ripping teeth

No

No

No

No

Buckle



The buckle stops the stones from falling out when the next stone is being loaded. the buckle also makes the stones stay in the container when you shake out the dirt from the stone fork. A tie-bar made of special steel, positioned under the buckle, gives the stone fork maximum strength at the front edge. The picture above shows a K.T.S Stone Fork 2.0 m.

 

 


Order a very detailed colour brochure and price list free of charge! Click below!

 

 

 

In our attempts to continuously improve our products, K.T.S Maskiner and the manufacturer reserve the right to change the design and specifications of the products whenever they consider it appropriate, and without prior notification.

Reprinting of the text and pictures in this website in its entirety or parts thereof is forbidden, and offenders will be prosecuted.